Installation Guide

“VITREO X” Rev.3 Ver.2 03/2014 7

Fig. 7

6. Please orient the Pivot assembly (18) holes in the Pivot bars

according to the desired swing of the door.

Attach top and bottom Pivot bars (05) to the Stationary glass (03)

using clear Rubber spacers (13), Decorative washers (16) and Hex

socket bolts M8×25 (15). Place the clear Rubber spacers between

the Pivot bar and the Stationary glass to prevent glass to metal

connection.

Place the Decorative washer between the Hex socket bolts M8×25

and the Stationary glass.

See Fig. 8 for details.

Fig. 8

Inside