Installation Guide

“VITREO X” Rev.3 Ver.2 03/2014 6

4. Place the other Wall profile (02) to the opposite wall

above the shower base or tub and level it vertically.

Please note that this Wall profile must be aligned

perfectly with the opposite Wall profile on the threshold.

Mark the drilling holes on the wall through the predrilled

holes in the Wall profile.

Drill the holes in the wall using a Ø 5/16” drill bit and

insert the Wall anchors (06).

Run a bead of waterproof silicone along the back of the

Wall profile.

Fasten the Wall profile to the wall using the Big flat

head screw ST4.2×40 (07).

See Fig. 5 for details.

Fig. 5

5. Insert the assembled Stationary glasses (03) into the Wall profiles

(02).

See Fig. 6 and Fig. 7 for details.

Fig. 6

Ø5/16"