Installation Guide

“VITREO X” Rev.3 Ver.2 03/2014 9
8. Push the Flanged anti-water strip
(12) to the vertical edge of the
Glass door (04) to seal between
the door and the Stationary glass
(03).
Push the Bottom anti-water strip
(11) to the bottom edge of the
Glass door.
Push the Magnetic strips (10) to
the vertical edges of the Glass
door and the Stationary glass.
See Fig. 11 for details.
Fig. 11
9. After final adjustments of both Stationary glass (03),
panels, drill holes through the pre-drilled holes in
both of the Wall profiles (02) into the first layer of
the Glass profiles (01) using Ø 1/8” drill bit.
Use the Round head screws ST4.2×10 (08) to secure
the Glass profiles inside the Wall profiles. Use the
raised white washer with the screw and attach the
Decorative Covers (09).
See Fig. 12 for details.
Fig. 12
1
2
3
4
5
6
Ø1/8"
Ø1/8"
1
2
4
3
Inside
Inside
Glass door
pivot side
Inside Inside