Installation Guide

“VITREO X” Rev.3 Ver.2 03/2014 5

2. Place the Wall profile (02) to the wall above the

shower base or tub and level it vertically.

See Fig. 3 for details.

Fig. 3

3. Make sure the Wall profile (02) is absolutely vertical.

Mark the drilling holes on the wall through the predrilled

holes in the Wall profile.

Drill the holes in the wall using Ø 5/16” drill bit and

insert the Wall anchors (06).

Run a bead of waterproof silicone along the back of the

Wall profile.

Fasten the Wall profile to the wall using the Big flat

head screw ST4.2×40 (07).

See Fig. 4 for details.

Fig. 4

Ø5/16"