Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

4. Attach the Pivot assembly (07) to the top and the bottom ends

of the Glass profile for glass door (02) with the Flat head

screws ST4.2×25 (15) and M4×16 bolt (13).

See Fig. 4 for details.

NOTE: The Back plate (K) of the Pivot assembly should face

inside of your shower.

Fig. 4

5. Slide the Glass profile for glass door (02)

with Pivot assemblies (07) into the groove

of the Wall profile for glass door (01) and

secure the upper Pivot retainer (08) to the

upper Pivot assembly (07) with Round

head socket bolt M6×12 (17).

See Fig. 5 for details.

Fig. 5