Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

Style “A”: Single Shower Door Assembly and Installation

NOTE: Use parts from Diagram “A” for the Single Shower door assembly and installation.

1. Place the Wall profile for glass door (01) on

the shower base or the threshold vertically

against the finished wall.

Adjust the Wall profile for glass door vertically

using a level.

Mark the drill holes on the wall through the

predrilled holes in the Wall profile for glass

door.

Now drill holes in the wall and insert the Wall

anchors (12).

See Fig. 1 for details.

Fig. 1

Ø5/16”

±0.0