Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

Style “D”: Glass Shelves Assembly and Installation

NOTE: Use parts from Diagram “B” for the Glass Shelves assembly and installation.

43. Mark the Glass shelf (22) position on the wall.

According to the measurements in Fig. 46.1, mark the

drilling holes for the Shelf brackets (without nut)

(31).

Drill the holes using Ø 5/16” drill bit and insert the

Wall anchors (23).

Attach the Shelf brackets (without nut) to the wall

using the Countersunk screw ST4.2×40 (32) and

attach the Shelf brackets (with nut) (30) to the

Stationary glass (21).

Insert the Glass shelves into the Shelf brackets and

fasten the screws at the bottom of the brackets.

See fig. 46 for details.

Fig 46

6 3

2”

6”

Ø5/16”

5 2