Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

39.

Do the final adjustment if necessary. Make sure the

Glass door (03) closes tight to the Anti-Water strip

(29).

See fig. 42 for details.

Fig 42

40. After final adjustments of the Assembled unit drill

the holes in the Glass profiles (02) and (04)

through predrilled holes in the Wall profiles (01)

and (05) using Ø 1/8” drill bit.

NOTE: You only need to drill through the first layer

of the Glass Profile.

Use Round head screws ST4.2×10 (14) to secure

the Glass profiles inside of the Wall profiles.

Cover the exposed screw holes with Decorative

cover (09).

See fig. 43 for details.

Fig 43

Ø1/8”