Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

NOTICE:

The Glass door has 2 cuts for the Pivot assemblies.

The deeper cut must be on the top.

32. Remove the Bolts (L) and Back plates (K) from the

upper and bottom Pivot assemblies (07).

Place the Glass door (03) to the Pivot assemblies,

attach Back plates (K) to its position and fasten tight

the Bolts.

Make sure the clear rubber Spacers (J) are in between

the glass and the metal parts. Secure tide the Glass

door to the Pivot assemblies.

See fig. 34 for details.

Fig 34

33. Mount the Handle (06) onto the Glass door (03).

See fig. 35 for details.

Fig 35