Installation Guide

“Elegance” Rev.4 Ver.1 07/2013

30. Attach the Pivot assembly (07) to the top and the

bottom ends of the Glass profile for glass door (02)

with the Flat head screws ST4.2×25 (15) and M4×16

bolt (13).

See Fig. 32 for details.

NOTE: The Back plate (K) of the Pivot assembly

should face inside of your shower.

Fig 32

31. Slide the Glass profile for glass door

(02) with Pivot assemblies (07) into the

groove of the Wall profile for glass

door (01) and secure the upper Pivot

retainer (08) to the upper Pivot

assembly (07) with Round head socket

bolt M6×12 (17).

See fig. 33 for details.

Fig 33