Installation Guide
“Elegance” Rev.4 Ver.1 07/2013
22
26. Apply clear silicone along the inner channel of the
Glass profile (04) and push the Stationary glass (21)
inside the channel.
NOTE: If you have difficulty sliding the Glass profile
over the Stationary glass, you can slightly tap on the
Glass profile with a rubber mallet and a piece of wood.
Please do not strike directly on the profile.
See Fig. 28 for details.
Fig 28
27. Place the Wall profile for glass door (01)
on the shower base or the threshold
vertically against the finished wall.
Adjust the Wall profile for glass door
vertically using a level.
Mark the drill holes on the wall through
the predrilled holes in the Wall profile for
glass door.
Now drill holes in the wall and insert the
Wall anchor (12)
See Fig. 29 for details.
Fig 29
±0.0
W2
3
1
Ø5/16”
2
1
2
3