Installation Guide

“Elegance” Rev.4 Ver.1 07/2013
20
Style “B” and “D”: Stationary Glass Assembly and Installation
NOTE: Use parts from Diagram “B” or “C” (depends on your model style) for the Stationary
Glass assembly and installation.
Glass shelves installation
24. Mark the Glass shelf (22) position on the wall.
According to the measurements in Fig. 25.1, mark
the drilling holes on the wall for the Shelf brackets
(31).
Drill the holes using Ø 5/16” drill bit and insert the
Wall anchors (23).
Attach the Shelf brackets (31) to the wall using the
Countersunk screw ST4.2×40 (32) and attach the
Shelf brackets (30) to the Stationary glass (21).
Insert the Glass shelves into the Shelf brackets
and fasten the screws at the bottom of the brackets
See Fig. 25 and Fig. 26 for details.
Fig. 25
Fig. 26
2
3
4
5
6
1
6”
2”
Ø5/16”