Installation Guide

“INFINITY-Z” Rev.2 Ver.4 08/2013

13. Slide the top door wheels into the top Guide

rail (03). Push the bottom wheels in the

bottom Guide rail by pressing down the

button.

Use the Phillips screwdriver #2 (do not use

power screwdriver) to adjust upper wheels,

make sure they move smoothly and the door

closes tight.

See Fig. 13 for details.

Fig. 13

14. Install the Handle (06) to the Glass door (04).

Press the anti-water strips (07) on the vertical edge of the

Stationary glass (05) and both vertical edges of the Glass door.

Insert the Seal gasket (15) into the Wall profile (02).

See Fig. 14 for details.

Fig. 14