Installation Guide
Table Of Contents
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools NeededParts Needed
INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 3 10/2022 23
©2022 DreamLine® All Rights Reserved
Fig 15
!
DO NOT drill the profiles throughout, ONLY through the
first layer of the Wall Profile (#02) and Glass Profile (#01).
Decorative Cap (#13)
Washer (#13)
ST4.0×10mm Pan Head Screw (#11)
inside
3/4”
Ø1/8”
wall
1
inside
2
wall
inside
3
wall
inside
4
wall
13
x4
11
x4
NOTE
The ST4.0×10mm Pan Head Screws (#11) and Decorative Covers (#13)
should be installed to both the top and bottom of each profile.
NOTE
Make sure the Bottom Rail is tight to the threshold before
screwing the Wall Profiles and Glass Profiles together.
15