Installation Guide
Table Of Contents
©2022 DreamLine. All Rights Reserved
SLIMLINE SHOWER BASE manual Ver 5 Rev 9b 08/2022
13
Shower Base Installation - Preparation
1. Ensure that the floor and the studs
are at right angles.
Provide a 5”×5” opening in the sub-
floor for the drain.
The 2” PVC waste pipe should
extend above the surface of the
sub-floor according to the drain
installation instructions and the
height of the Shower base.
Refer to the product drawings and
tables in this installation manual for
the drain location.
(Fig 1a and Fig 1b)
Fig 1a
Fig 1b
(See Product Chart for Drain Location)
(5"×5") Opening
2" PVC Waste Pipe
90°
90°
90°
90°
90°
2" PVC Waste Pipe
(5"×5") Opening
(See Product Chart for Drain Location)