Manualshelf

Installation Guide

ManualsBrandsDreamLine ManualsBathVisions 32 in. x 60 in. x 76.75 in. Framed Sliding Shower Door in Chrome with Center Drain Acrylic Base and Backwall Kit
65666768697071727374
© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
©2018 DreamLine. All Rights Reserved
14VISIONS Shower and Tub Door Manual Ver 2 08/2018
Fig 14
1
2
3
Ø1/8"
3/4”
inside
ATTENTION: Do Not drill the profiles throughout, only
through the first layer of the wall profile and glass profile.
washer
screw
cap
!
12
(x4)
14. Perform the final adjustments of the assembled unit within the Wall Profiles (#02).
Make sure the Bottom Guide Rail (#03) is tight to the threshold. Drill Ø1/8” holes into the center
of the Wall Profile (#02) and into the Glass Profile (#01). Drill one hole at the top and one hole at
the bottom of each profile (approx 3/4” from the wall) .
Secure the Wall Profiles (#02) to the Glass Profiles (#01) using the Washers (#14) and ST4.2×10
Pan Head Screws (#12). Cover the exposed screw heads with the Decorative Covers (#14). (Fig 14)