Installation Guide

13VISIONS Shower and Tub Door Manual Ver 2 08/2018

NOTE: DO NOT attach the handle to the door glass until instructed.

DO NOT use the handle to lift the glass during installation. This may result in damage to

the glass and/or serious injury. Always use an assistant or a professional grade glass suction

cup when handling heavy glass.

door

Fig 12

*Adjust the top wheel

assemblies if necessary

inside

Fig 13

door

inside

panel

2 3

1 42 3

ATTENTION: Use caution not to close the

door glass together during installation.

12. From inside the shower, insert the Bottom Wheel Assemblies (#17) into the bottom Guide

Rail (#03) (Fig 12.1-2), lift the door up and set the Top Wheel Assemblies (#17) into the top

Guide Rail (#03) (Fig 12.3). Test the operation of the door, and if necessary, use a #2 Phillips

screwdriver (do not use a power screwdriver) to adjust the upper wheels so the door rolls smoothly

and closes tight. (Fig 12)

13. Install the Handles (#06) to the Door Glass (#04).

Press the shorter Vertical Vinyl Seals (#08) onto the vertical edges of the Panel Glass (#05) and the

longer Vertical Vinyl Seals (#08) onto the vertical edges of the Door Glass (#04).

Press the Magnetic Vinyl Seals (#07) onto the vertical edges of both Door Glass (#04). (Fig 13)