Installation Guide

9VISIONS Shower and Tub Door Manual Ver 2 08/2018

NOTE: The holes in the Wall Profiles (#02) are off-center and should align

with the holes in the glass profiles and the groove for the panel glass. (Fig 5.1)

Fig 6

Fig 5

2 3

Inside

shower

6. Move the assembled frame into position

on the threshold, and push the Wall Profiles

(#02) tight to the walls to compensate for any

out-of-plumb conditions. Push the bottom rail

down tight to the threshold and adjust the

frame to a vertical position.

Confirm with a level before marking the

position of the wall profiles and the holes for

drilling. (Fig 6)

5. Slide the Wall Profiles (#02) all the way onto the Glass Profiles (#01) on both sides. (Fig 5)