Installation Guide
VISIONS Ver 1 Rev 7 07/2015
7
6.
Install the Single side strips (#09) in-between the
Stationary glass (#05) and the Glass profiles (#01). The
strips should be inserted on the side that is facing the inside
of the shower. (See detail in Fig. 7)
ATTENTION:
Do not use a screwdriver or other metal objects to install
the Single Side Strip; you can scratch or damage the glass
and aluminum.
7.
Repeat Step #4 and Step #5 to fasten the upper Guide rail
(#03) to the Glass profiles (#01) and secure the Stationary
glass (#05) with the Glass holders (#16).
See Fig. 7 for details.
Fig. 7
8.
Slide the Wall profiles (#02) all the way into the Glass profiles
(#01) on both sides. Make sure the flanges of the Wall profiles
(#02) face inside the shower.
See Fig. 8 for details.
Fig. 8
inside