Installation Guide

INFINITY-Z shower and tub door manual Ver 5 08/2017

Fig 17

Ø1/8"

3/4”

of the wall profile and glass profile.

ATTENTION: Do Not drill the profiles throughout, only through the first layer

inside insideinside

15. Perform the final adjustment of the assembled unit within the Wall Profiles (#02) making sure the

bottom rail is tight to the threshold. Drill Ø1/8”holes in the center of the Wall Profile (#02) into the

Glass Profile (#01). Drill one hole at the top and one hole at the bottom of each profile.

Secure the Wall Profile (#02) to the Glass Profile (#01) using the Round Head Screws ST4.2x10 (#11)

and raised white washers. Cover the exposed scew heads with the Decorative Covers (#13) (Fig 17)