Installation Guide

INFINITY-Z shower and tub door manual Ver 5 08/2017

Fig 15

inside

Fig 16

outside outside outside

door

panel

TIP: The longer Anti-Water Strips (#07) attach to the edges of the Door Glass (#04).

The shorter strip attaches to the edge of the Stationary Glass (#05).

ATTENTION: To prevent scratching or

damaging the glass and aluminum: Do Not use

a screwdriver or other metal object to install the

Single Side Strip (#08)

13. Starting from the bottom, insert the Single Side Strip (#08) into the

groove between the Stationary Glass (#05) and the glass profile using a

wooden or plastic shim. The strip should be inserted from the inside of

the shower. (Fig 15)

14. Install the Handle (#06) to the Door Glass (#04). Press the Anti-Water Strips (#07) onto the

vertical edges of the Stationary Glass (#05) and both vertical edges of the Door Glass (#04). Insert

the Seal Gasket (#15) into the Glass Profile (#01) starting from the bottom (Fig 16.3) (Fig 16)