Installation Guide
Table Of Contents

Ver. 1, Rev. 1 
4
Preparation for Installation of Back Panel 
1.  Place a mark on the walls at a distance of 1” 
(one inch) from the corner and draw a plumb 
vertical line from top to bottom. 
See Fig. 1 for details. 
NOTE:
Repeat this step for both corners. 
Fig. 1 
2.  Measure the back wall of the shower between 
the vertical lines you marked in Step 1
. 
This distance is marked as “W”. 
See Fig. 2 for details. 
Fig. 2 
W
1"
1"
1
2










