Installation Guide

Table Of Contents

Ver. 1, Rev. 1

19. Apply sealant to the entire surface of the

reverse side of the other Side panel (01).

See Fig. 21 for details.

20. Slide the narrow edge of the Side panel (01)

behind the Corner cover (02).

Align trimmed edge of the Side panel (from

Step. 9)

with the marked line on the wall (in

Step. 7)

and push the Side panel against the

wall.

Align the top of both Side panels and the

Back panel before the sealant sets. Apply

equal pressure to the whole surface of the

Acrylic panels from top to bottom.

See Fig. 23 for details.

Fig. 23

21. Once all panels are aligned, fasten tight the Corner

covers (02) to secure the Side panels (01) and the

Back panel (09).

Cover the screw holes with the Decorative covers

(08).

See Fig. 24 for details.

Fig. 24