Installation Guide

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015
19
ATTENTION;
Prior to the next step, please be sure the part of the
wall for installation of the Decorative edge molding
(03) is clean, dry and free from soap, oil and any
construction debris.
25. Gently remove the plastic tape from the adhesive side
of the Decorative edge molding (03) and firmly press
it to the edge of the Side panel (01) from top to
bottom.
See Fig. 31 for details.
Fig. 31
26. Apply caulk along the top edges of
the Side panels (01) and the Back
panels (09).
Apply caulk along the connection of
the bottom edges of the Side
panels and bottom edges of the
Back panels with the Shower base.
See Fig. 32 for details.
ATTENTION:
Installation of your “QWALL-5”
Acrylic shower wall is complete.
If you want to install Glass shelves
(05) to your Shower, follow to the
next step.
Fig. 32
1
2
Side Panel
Wall
Molding
Decorative
Side Panel
Wall
Molding
Decorative