Installation Guide

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015
15
18. Slide the right edge of the left Back panel (09) all the way
behind the Center cover (10) and push the Back panel against
the wall.
Slide the left edge of the right Back panel (09) all the way
behind the Center cover (10) and push the Back panel against
the wall as well.
You can adjust the position of the Back panels before the
sealant sets.
Apply equal pressure to the whole surface of the Back panels
from top to bottom.
See Fig. 23 and Fig. 24 for details.
Fig. 23
Fig. 24
1
2
3