Installation Guide

Table Of Contents

Ver. 1, Rev. 1

17. Apply the sealant to the entire surface of the

reverse side of the Side panel (01).

Also, apply the sealant around the drilled

holes.

See Fig. 21 for details.

Fig. 21

18. Slide the narrow edge of the Side panel (01)

behind the Corner cover (02).

Align trimmed edge of the Side panel (from

Step. 9)

with the marked line on the wall (in

Step. 7)

and push the Side panel against the

wall.

NOTE:

Make sure the drilled holes on the Side

panel are also aligned with the fixtures on

the wall.

See Fig. 22 for details.

Fig. 22