Installation Guide

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015

Acrylic Back Panel and Side Panel Installation Instruction

14. Attach the Center cover (10)

vertically at the center point along

the line (from Step. 3) and mark the

drilling holes through the predrilled

holes in the Center cover.

Drill the holes using Ø5/16” drill bit

and insert the Wall Anchors (06).

See Fig. 17 for details.

Fig. 17

15. Mount the Center cover (10) to the centerline of the

back wall using the Countersunk screws ST4.2×40

(07). Do not fully tighten the screws at this time; leave

them loose for further installation.

See Fig. 18 and Fig. 19 for details

Fig. 18

Ø5/16"