Installation Guide

Tools Needed

PRISM PLUS Shower Enclosure Manual Ver 2 012020

NOTE

1 2 3* 4*

(Left-hand L-Bar™ Support Bracket shown)

Max 3/16” (4mm)

* To adjust the angle of the L-Bar™: Loosen the M5 x 14.5 screws, rotate the

appropriate set screw (See Fig 12.3 and 12.4) to adjust the angle of the L-Bar™

(up to 3/16” (4mm)) in the desired direction. Hand tighten the M5 x 14.5

screws after adjustment is complete and replace the decorative cover.