Installation Guide

Tools

PRISM PLUS Shower Enclosure Manual Ver 2 012020 5

Extended driver bit

Razor Knife

Professional-grade Glass Suction Cup

(optional but recommended)

Work Gloves

Safety Glasses

#2 Phillips

Driver Bit

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the

Detailed Diagram on page 6 and parts list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the

bottom of the box. If any parts are damaged or missing, please contact DreamLine

for replacement.

NOTE

Retain these installation instructions for future reference.

Drill bit

(Ø5/16")

(Ø1/8")

(3mm)

(Ø3/16")

(4.76mm) (8mm)

Tape

Measure

Pencil

Screwdriver

#2 Phillips

Level

Drill

Power

Hammer

Soft Head

13/16” shims

100% Silicone*

*Quick-drying/fast-curing

silicone recommended

for the installation of

hinge panels.

Verify that the correct model size has been ordered; measure the finished opening

before proceeding with the installation.

TIP

Confirm that the finished walls are plumb and the threshold is level and pitched into the

shower area.

Cover the shower/tub drain with tape prior to installation to prevent the loss of screws

or small parts.

Use a good quality waterproof, mildew-resistant 100% silicone.