Installation Guide

Q-Wall 4 manual Ver 1 Rev 2 08/2015
11
11. Slide the narrow edge of the Side panel
(01) behind the Corner cover (02).
Align trimmed edge of the Side panel
(from Step. 4) with the marked line on the
wall (in Step. 2) and push the Side panel
against the wall.
NOTE:
Make sure the drilled holes on the Side
panel are also aligned with the fixtures on
the wall.
See Fig. 15 for details.
12. Apply sealant to the entire surface of the
reverse side of the other Side panel (01).
See Fig. 14 for details.
13. Slide the narrow edge of the Side panel
(01) behind the Corner cover (02).
Align trimmed edge of the Side panel
(from Step. 4) with the marked line on the
wall (in Step. 2) and push the Side panel
against the wall.
Align the top of both Side panels and the
Back panel before the sealant sets. Apply
equal pressure to the whole surface of the
Acrylic panels from top to bottom.
See Fig. 16 for details.
Fig. 16
1
2
1
2
Fig
. 15