How to Guide

10Q-Wall 2 manual Ver 3 Rev 2 11/2015
Fig 12
Fig 13
40-1/2” max
29-7/8” min
72-7/8”
8. Place the Side Acrylic Wall Panel in
position on the wall and apply pressure to
the entire surface from top to bottom to
ensure good overall contact.
Position the Side Acrylic Wall Panel so that
the top is flush with the Corner Acrylic
Panel. The bottom of the Side Acrylic Wall
Panel should make contact with the shower
base.
See Fig 12 for details.
9a. Using a razor knife and a straight edge, trim the
Side Acrylic Wall Panel to the desired width by
scoring the acrylic wall surface and removing the
excess.
See Fig 13 for details.