How to Guide

6Q-Wall 2 manual Ver 3 Rev 2 11/2015
Fig 4
Fig 5
3. Place the Corner Acrylic Panel into position in the
corner and apply pressure to the entire surface from
top to bottom to ensure good overall contact.
The bottom of the Corner Acrylic Panel should make
contact with the shower base.
See Fig 4 for details.
4. Install the Side Acrylic Wall Panel on the wall
opposite of the shower fixtures first. Run several
beads of adhesive throughout the area where the
Side Acrylic Wall Panel will attach to the wall up
to the edge of the base threshold (including the
section of the Corner Acrylic Panel where the
Side Acrylic Wall Panel will overlap).
See Fig 5 for details.
NOTE: If you intend to trim your Side Acrylic Wall
Panels flush to the edge of the base/threshold, then
apply adhesive up to that area.
If you intend to allow the Side Acrylic Wall Panels
to extend beyond the base/ threshold, then apply
adhesive up to that area.