Installation Guide

11Q-Wall 2 manual Ver 3 Rev 2 11/2015
Fig 14
Fig 15
Enclosure wall profile
10. Clean any excess adhesive from around the acrylic
wall edges and apply a bead of silicone or caulk to the
vertical and horizontal outside seams where the panels
are joined and where they meet the threshold and also
along the top edges.
See Fig 15 for details.
Note:
Remove any air bubbles or gaps from the walls prior to
sealing the edges by applying pressure to the surface
and moving towards the nearest edge.
9b. If installing a DreamLine
®
enclosure, you may
determine the position of the enclosure and trim the
Side Acrylic Wall Panel flush with the outside edge
of the wall profiles.
See Fig 14 for details.