Installation Guide

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece

count with your packing slip. After opening all boxes and packages read this introduction carefully.

Check that all of the needed parts are included in the package by checking off the components on

the “Diagram of Acrylic Wall Components”. If the unit has been damaged, has a finishing defect, or

has missing parts, please contact our customer support department within 3 business days of the

delivery date. Please note that DreamLine

will not replace any damaged products or missing

parts free of charge after 3 business days or if the product has been installed. Feel free to

contact DreamLine

if you have any questions, and please provide an order number, job name or

other proof of purchase to help us identify your original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine

not responsible for code compliance standards for your project and will not accept any

returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by local code)

plumber for all plumbing installation

4. This acrylic wall system is specially designed to be installed over any solid surface. If you are

installing the acrylic walls over existing tiles, remove all loose tiles before the installation. If you are

installing over existing painted walls, remove all loose paint and apply a coat of primer. Please note

that some cutting and drilling may be necessary during the installation process.

5. Make sure to turn off the water supply, remove faucet, handles or any fixture trims protruding

from the wall. Clean the entire surface using regular household detergent removing soap film and

dirt from all wall surfaces and allow to dry.

6. Use an adhesive that is safe for use with acrylic and that will adhere to the surfaces that you are

applying it to. Follow the adhesive manufacturer’s instructions for the application of their product.

NOTE: The Q-Wall 2 is designed and sized to work best with DreamLine

Neo-angle,

Quarter-round and Square corner bases. The Quarter-round base is used as an example throughout

this manual.

2Q-Wall 2 manual Ver 3 Rev 2 11/2015