Installation Guide

Tools Needed

UNIDOOR MADRID Shower Door and Inline Panel Manual Ver 1 122019 12

5/8”shim

Fig 2a

Fig 2b

left-swing door installation shown

Use the provided 5/8” (16mm) spacer shims when positioning the Door Glass

(#01) to maintain the proper spacing between the bottom of the Door Glass

and the threshold. Secure the spacers to the glass with tape if necessary.

(5/8” (16 mm) wood or plastic shims may also be used on the threshold)

Check the Door Glass (#01) with a level to verify it is plumb BEFORE marking the Hinge Assembly (#05) positions

on the wall.

Use the 72” (1829 mm) 180° Inline Strike Vinyl (#19) (packaged with the Inline Panel Glass) as a height

reference to be sure that the Door Glass height will match the Inline Panel height at 72” (1829 mm).

TIP

NOTE