Installation Guide

Tools Needed

Parts Needed

PVC Hinge Spacer Information

(use only if necessary)

UNIDOOR MADRID Shower Door and Inline Panel Manual Ver 1 122019 11

Fig 1a

The included PVC Hinge Spacers (#31) are

provided to compensate for up to 1/4” (6mm)

of minor out-of-plumb conditions on the

hinge-side wall. Unnecessary use of the PVC Hinge

Spacers could reduce the required opening size for

the door glass.

1mm

2mm

3mm

Only use spacer(s) as

necessary behind one

hinge, not both.

Hinge side wall out at the top

plumb

line

plumb line

Hinge side wall out at the bottom

PVC Hinge

Spacer(s)

PVC Hinge

Spacer(s)

NOTE

If the wall is out-of-plumb at

the top (up to -1/4” (-6mm)),

install the appropriate PVC

Hinge Spacer(s) behind the

top Hinge Assembly (#05)

wall plate to plumb during

installation.

NOTE

If the wall is out-of-plumb at the

bottom (up to -1/4” (-6mm)),

install the appropriate PVC Hinge

Spacer(s) behind the bottom

Hinge Assembly (#05) wall plate

to plumb during installation.

NOTE