UNIDOOR MIRA SHOWER DOOR AND INLINE PANEL INSTALLATION INSTRUCTIONS PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION + STEP 1: Install Shower Door = STEP 2: Install Inline Panel UNIDOOR MIRA For more information about DreamLine® products please visit DreamLine.
UNIDOOR ® e SHOWER DOOR INSTALLATIONin INSTRUCTIONS ved (FOR SINGLE DOOR) see pages 5-6 for related model styles r L e s m e PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION a R e r s D ght © Ri All Model #s: SHDR-20237210F-## SHDR-20247210F-## SHDR-20257210F-## SHDR-20267210F-## SHDR-20277210F-## SHDR-20287210F-## SHDR-20297210F-## SHDR-20307210F-## ## = Finish: 01 = Chrome 04 = Brushed Nickel 06 = Oil Rubbed Bronze 09 / 89 = Satin Black left-swing installation shown Model #: SHDR-202472E-89 UNIDO
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a ® soft cloth.
Section Title Page # ClearMax® Coating Information — Warnings and General Preparation 2 Required Reinforcement Information 3 ® Unidoor Glass-to-Wall Hinge and Handle Location ved e r n i L e Model Specific Preparation s m e a sR Tools e r t DDoor Components Detailed Diagram of Shower h © Rig Parts List Specifications All Unidoor Styles Installation Steps 4 5-6 7 8 9 10 11 12-22 PVC Hinge Spacer Information (if necessary) 13 Handle Assembly Installation 17 Sweep Vinyl Seal Installation 18
• GENERAL PREPARATION • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
! © 2019 DreamLine® All Rights Reserved Required Reinforcement Information Install DOUBLE STUDS OR install 2”× 6” WOOD BLOCKING between the studs where the hinge assemblies will attach to the wall.
© 2019 DreamLine® All Rights Reserved UNIDOOR Glass-to-Wall Hinge and Handle Location 7-7/8” (200mm) d e e n v i r L e s m e a R e Dr ghts © Ri All ® 31-3/4” (806.5mm) UNIDOOR DOOR GLASS 2” (50mm) 55-5/8” (1413mm) 8” (203mm) handle holes 72” (1829mm) from threshold 31-3/4” (806.5mm) 64-1/8” (1629mm) from threshold 7-7/8” 8-1/2” (216mm) (200mm) from threshold 32-3/8” (822.3mm) from threshold GLASS 5/8” SPACE THRESHOLD 5/8” (15.875mm) SPACE 5/8” (15.
© 2019 DreamLine® All Rights Reserved NOTE UNIDOOR / PLUS / -LS / EDGE Styles left door-swing installations shown * For the panel installation instructions, please refer to the separate manual included in the panel glass packaging. d e e n v i r L e s m e a R e ts B * Dr ghSTYLE © Ri All ® STYLE A UNIDOOR / UNIDOOR-LS / UNIDOOR EDGE Single Shower Door 23”-30” (EDGE model=24”) *refer to the Detailed Diagram on Page 9 of this manual to begin the installation.
© 2019 DreamLine® All Rights Reserved UNIDOOR-X Styles left door-swing installations shown UNIDOOR-X (with glass-to-glass hinges) d e e n v i r L e s m e a R e Dr ghts © Ri l STYLE L1 * Al STYLE M * ® ᧘ ° UNIDOOR-X Shower 23”-30” with 6” hinge panel and 30”or 34” full height return panel installed with U-Channels ᧘ ° UNIDOOR-X Shower Door 23”-30” with 6” or 24” hinge panel installed with U-Channels d e e n v STYLE M1 * i STYLE M3er* L s m e a R e r s D ght © Ri All ® ᧘ ° UNIDOOR-X Shower Door 23
©2019 DreamLine® All Rights Reserved Model Specific Preparation ! REQUIRED: No Adjustment for Out-of-Plumb; Verify finished walls with a level Threshold must be level ! L R Swing Swing ! ±0.0 d e e n v i r L e s m e a R e Dr ghts © Ri All ® ±0.
©2019 DreamLine® All Rights Reserved Tools Level Tape Measure #2 Phillips driver bit Razor Knife #2 Phillips Screwdriver d e e n v i r L e s m e a R e Dr ghts © Ri All ® Pencil Extended driver bit Safety Glasses Drill Bit Ø1/8" (3mm) Work Gloves Drill Bit Ø1/4" (6mm) Power Drill Diamond-Tipped Drill Bit Ø1/4” (6mm) (Optional--for porcelain tile) Professional-grade Glass suction cup (Optional but Recommended) TIP Verify that the correct model size has been ordered: measure the finished op
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 Detailed Diagram of Shower Door Components ® d e e in erv L s m e a R 05 e r s t D gh © Ri All 04 08* 06 02 01 d e e 05 in erv L s m e a R e r s t D gh © Ri l l A 07 ® 04 06 9 left-swing installation shown 08* for Models: SHDR-20237210F-## SHDR-20247210F-## SHDR-20257210F-## SHDR-20267210F-## SHDR-20277210F-## SHDR-20287210F-## SHDR-20297210F-## SHDR-20307210F-## SHDR-202472E-89 ## = 01/04/06/09/89 © 2019 DreamLine® All Rights Reserved
©2019 DreamLine® All Rights Reserved Parts List 01 02 handle styles may vary by model 04 or d e e n v i r L e x1 x1 s m e a R e Dr ghts © R06i 07 l Al Unidoor / PLUS Door Glass 05 Hinge Assembly ST5.
©2019 DreamLine® All Rights Reserved Specifications NOTE The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR, UNIDOOR PLUS, UNIDOOR-LS, UNIDOOR EDGE models. (for Unidoor-X models, use the manual packaged with the hinge d e e n v i r L e s m e a R e Dr ghts © Ri All panel glass in place of this manual). ® Before you begin the installation, check your finished opening size.
© 2019 DreamLine® All Rights Reserved Installation Steps 1 outside d e e n v i r L e s m e a R e Dr ghts © Ri A! ll ® Install the hinges centered in the cutout and flush with the edge of the Door Glass Fully and evenly tighten the hinge bolts by hand. It is normal to hear the gaskets compress onto the glass. The door glass can be flipped for left or right swing installation. However, the ClearMax label must be on the inside.
© 2019 DreamLine® All Rights Reserved PVC Hinge Spacer Information 1a (use only if necessary) Hinge side wall out at the top plumb line PVC Hinge Spacer(s) Hinge side wall out at the bottom d e e n v i r L e s m e a R e Dr ghts © Ri All ® ±0.0 If the wall is out-of-plumb at the NOTE bottom (up to -1/4” (-6mm)), NOTE install the appropriate PVC Hinge Spacer(s) behind the bottom Hinge Assembly (#05) wall plate to plumb during installation.
© 2019 DreamLine® All Rights Reserved 2 d e e n v i r L e s m e a R e Dr ghts © Ri All ® Fig 2a d e e n v i r L e s m e a R e Dr ghts © Ri All ® Fig 2b left-swing installation shown NOTE 5/8”shim ! TIP Use the provided 5/8” (16mm) spacer shims when positioning the Door Glass (#01) to maintain the proper spacing between the bottom of the Door Glass and the threshold. Secure the spacers to the glass with tape if necessary. (5/8” (15.
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 3 TIP Door Glass Installation OPTION A: (Install Door Glass with the hinges attached) Use caution while installing the hinge to the wall to avoid scratching the finished surface of the Hinge Assembly (#05) face plates. The manufacturer recommends using an extension driver bit to install these long screws. Painter’s Tape can also be used on the face plates to protect the hinge finish.
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 4 TIP Door Glass Installation OPTION B: (Install the Hinges to the wall First): Mark holes for drilling. Remove the hinges from the door glass. Drill the holes and attach the hinges to the wall. Set the Door Glass (#01) onto the 5/8” shims and use an assistant ® to install the door glass onto the hinges.
© 2019 DreamLine® All Rights Reserved Handle Assembly Installation 5 (handle style may vary by model) Single-sided Handle d e e n v i r L e s m e a R e Dr ghts inside © Ri All ® Fig 5a Back-to-Back Handle d e e n v i r L e s m e a R e Dr ghts © Ri inside All ® Parts Needed 02 or x1 Fig 5b Tools Needed left-swing installation shown UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 17
© 2019 DreamLine® All Rights Reserved Sweep Vinyl Seal Installation 6 d e e n v i r Fig 6b L e s m e a R e Dr ghts © Ri All ® Fig 6a d e e n v i r L e s m e a R inside e Dr ghts © Ri All ® NOTE If necessary, cut the Bottom Sweep Vinyl Seal (#07) to match the width of the Door Glass (#01). Fig 6c Parts Needed 07 x1 Tools Needed NOTE Press the Bottom Sweep Vinyl Seal (#07) onto the bottom edge of the Door Glass (#01).
NOTE © 2019 DreamLine® All Rights Reserved 7a Hinge Side Vinyl Seal Installation Cut the Hinge Side Vinyl Seal (#06) into three sections with a razor utility knife and notch according to the diagram below to fit around the hinges and sweep vinyl to prevent leakage. Fig 7a 7” (177.8 mm) d e e n v i r L e s m e a R e Dr ghts © Ri All ® 7/8” (22 mm) notch 7/8” (22 mm) notch Hinge Side Vinyl Cut Lengths Hinge Side Vinyls installed on Door Glass Door Glass 54” (1371.
1 © 2019 DreamLine® All Rights Reserved 7b Hinge Side Vinyl Seal Installation d e e n v i r L e s m e a R e Dr ghts © Ri All ® 2 3 d e e n v i 7b er Fig L s m e a R e r s D ght © Ri All ® left-swing installation shown This completes the installation of the Door Glass. ◾For Single Shower Door installation, proceed to the next step. ◾For models that include additional Panel Glass: Refer to the manual that is packaged with the Panel Glass to continue with the installation.
© 2019 DreamLine® All Rights Reserved Hinge Assembly Adjustment wall wall 85° The Adjustable Hinge Assemblies are factory pre-set to overclose to 85° to create a tight seal with the Strike Vinyl. If strike vinyl is not used, the hinges can be adjusted to close to a different angle (90° for example). wall inside wall wall inside d e e n v i r L e s m e a R e Dr ghts © Ri All wall NOTE The hinge assemblies are preset to overclose to 85º for a tight seal against the strike vinyl.
©2019 DreamLine® All Rights Reserved L-Strike Vinyl Seal Installation 8 (for single shower door installation only) The surfaces need to be clean and free of debris before installing the L-Strike Vinyl Seal (#08) NOTE d e e n v i r L e s m e a R e Dr ghts © Ri 2 All1 ® ! Before attaching the L-Strike Vinyl Seal (#08) to the wall, make sure the hinges are set to overclose when in the closed position. Refer to page 21 for more information on the adjustable Hinge Assemblies (#05),.
©2019 DreamLine® All Rights Reserved Bottom Sweep Vinyl - Tip TIP Notch the Bottom Sweep Vinyl (#07) on the inside where it overlaps the Strike Vinyl.
©2019 DreamLine® All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
©2019 DreamLine® All Rights Reserved Troubleshooting Problem/Symptom Suggested Solution •Check all shipping/packaging material for missing parts/components. •If not found, contact DreamLine Customer Support [1-866-731-2244] to order factory part replacement.
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 Factory Parts Information UNIDOOR -(PLUS/-X/-LS) (STYLE A) - HARDWARE ITEM # 02 02 04 05 05a 06 08 31a 31b 31c 07221041 / 07224041 / 07226041 / 07229041 07221086 / 07224086 / 07226086 / 07229086 092130 07411027 / 07414027 / 07416027 / 07419027 07551097 / 07554097 / 07556097 / 07559097 063011100-1829 063009000-1829 07550079 07550080 ® 07550081 BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 6 = Oil Rubbed Bronze; 9 = Satin Black d
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 122019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All UNIDOOR EDGE (SHDR-202472E-89) ITEM # 01 02 04 05 05a 06 07 11 31a 31b 31c 19** FACTORY PART NUMBER 010137002 07229086 092131 07419027 07559097 063011102-1829 063009000-1829 063015102-0595 07550079 07550080 07550081 063010102-1829 FACTORY PARTS INFORMATION ® ITEM DESCRIPTION QTY Door Glass Back-to-Back 8in. Tubular Handle Assembly for 10mm (3/8in) Glass ST5.
d e e in erv L s m e a R e r s D ght © Ri All ® d e e in erv L s m e a R e r s D ght © Ri All ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
PLATINUM LINEA with MirrorMax™ ® d e SHOWER PANEL INSTALLATION ine rvINSTRUCTIONS L e s m e PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION a R e Dr ghts © Ri All d e e in erv L s m e a R e r s D ght © Ri All ® SURF MIRA D3234721M12-08 D3234721M11-08 right wall installation shown IMPORTANT! DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice for the purpose of product improvement and customer experience.
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a ® soft cloth.
Section Title Page # ClearMax® Coating Information — Warnings and General Preparation 2 ® ved e r n i L Detailed Diagram of Shower Panelm Components se e a R e Parts List r s t D h Model Diagram g © i R Installation Steps l l A 180° Strike Vinyl Installation 15, 16 Reversible L-Bar™ Installation 22-25 Reversible L-Bar™ Feature 27-28 Model Specific Preparation Tools 3 4 5 6 7 8-26 Product Maintenance 29 Troubleshooting 30 Factory Parts Information 31-32 d e e n v Symbol Legendi r L e s
d e e n v i r L e s m e a R e r s D ght © Ri All IMPORTANT • • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
! 5/8” (15.8mm) minimum threshold REQUIRED: 1/4” (6 mm) Out-of-Plumb Adjustment on the Vertical U-Channel Only; Verify threshold and walls with a level ±0.0 L 5/8”(15.8mm) minimum threshold d e e n v i r L e s m e a R e Dr ghts © Ri All Threshold must be level ® ! ±0.0 R L single panel installation ©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved.
PLATINUM LINEA with MirrorMax™ Shower Panel Installation Manual Ver 2 022020 Detailed Diagram of Shower Panel Glass Components ® d e e in erv L s m e a R e r s t D gh © Ri All 09 23 13 11 d e e in erv L s 23 m e a R e r s t D gh © Ri l l A ® 29 5 right wall panel installation shown ©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved. Parts List 09 11 13 d e e n v i r L e x1 x1 s m e a R e Dr ghts © R29i 34 l Al ® Vertical U-Channel 23 ST4.2×40mm Countersunk Screw x8 Inline Panel Glass Ø5/16” (8mm) Wall Anchor Bottom U-Channel PVC Glass Spacer 0.
©2020 DreamLine® All Rights Reserved. Model Diagram 34” (863.6mm) Single Panel Installation d e v er (558.8mm) minimum access ® *22” space recommended when installed i!ne L s m e a R e r s D ght © Ri All It is recommended to install this 34”×72” (863.6×1828.8mm) single panel into a finished opening (no less than 56” (1422.4mm)) that will allow for at least 22” (558.8mm) of unobstructed access into the shower area. NOTE 72” (1828.8mm) *22” (558.8mm) minimum 34” (863.
©2020 DreamLine® All Rights Reserved. Installation Steps 1 ! The Vertical U-Channel (#09) allows for up to 1/4” (6mm) of out-of-plumb adjustment; verify the walls and threshold with a level before proceeding with the installation. d e e n v i r L e s m e a R e Dr ghts © Ri All ±0.0 ® ® ±0.
©2020 DreamLine® All Rights Reserved. 2 d e e n v i r L e s m e a Glass R e Dr ghts Width (W) © Ri All ® W Glass Height (H) H d e e n v i r L e s m e a R e Dr ghts i Fig 2© R All ® Parts Needed 11 x1 Tools Needed NOTE When applicable, patterned glass is designed to be installed with the wider border at the bottom.
Cut the Bottom U-Channel to: Glass Width (W) (+) 3/16” = 34” (863.6mm)=(L)** (see EXCEPTION below) Fig 3a d e e n v i r L e OR s m e a R e Dr ghts © Ri All ® (L) (L) Cut the Vertical U-Channel to: Glass Height (H) (-) 13/16” = (V) (for 72” model height, V= 71” (1803.6mm) Fig 3b Cut the Vertical U-Channel to 71” (1803.4mm) for the standard 72” (1828.
1 ©2020 DreamLine® All Rights Reserved. 4 2 d e e n v i 3 er L s m e a R e r s D ght © Ri All ® TIP Fig 4a Mark at least three (3) holes for the Bottom U-Channel (#29).
NOTE ©2020 DreamLine® All Rights Reserved. 5 ◾For installation into an Acrylic Threshold: drill an Ø1/8”(3mm) hole and use the ST4.2 x 40mm Countersunk Screw (#23) OR ◾For installation into a Tile Threshold: drill a Ø3/16”(4.76mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.
©2020 DreamLine® All Rights Reserved. 6 1 d e e n v i r L e s m e a R e Dr ghts © Ri All ® 2 Fig 6 right wall panel installation shown d e e n v i r L e s ! eam Re Dr ghts © Ri All ® To prevent damage to the glass: Fully countersink the screws so the screw heads do not stick up above the surface of the u-channel.
©2020 DreamLine® All Rights Reserved. 7 Fig 7a d e e n v i r L e s m e a 2” (50.8mm) R e r D ghts © Ri All ® Fig 7b d e e n v i r L e s m e a R e Dr ghts © Ri All ® ! Cut several 2”- 3” (50.4mm-76.2mm) pieces of the PVC Glass Spacer 0.5mm (#28).
©2020 DreamLine® All Rights Reserved. 8 INLINE PANEL model only d e e n v i r L e s m e a R e r s t D h TIP © Rig All ® Determine the proper orientation of the 180° Strike Vinyl (#19). Cut a 1” (25.4mm) notch into the bottom end to allow the vinyl to fit tight around the Bottom U-Channel (#29) for Step#9.
©2020 DreamLine® All Rights Reserved. 9 d e e n v i r L e s m e a R e Dr ghts © Ri All ® NOTE The Vertical (#09) U-Channel sits on top of the Bottom (#29) U-Channel.
©2020 DreamLine® All Rights Reserved. 10 1 1/4” MAX d 3 e e n v i r L e s m e a R e Dr ghts2 © Ri All ® Fig 10a right wall single panel installation shown 2 1 1/4” MAX inline pane l doo NOTE For single panel installation, it is optional to dry-fit the Panel Glass (#11) into the u-channels before marking the Vertical U-Channel (#09) position on the wall. 1/16” - 1/8” (1.58mm - 3.
©2020 DreamLine® All Rights Reserved. 11 NOTE ◾If a stud is present behind the wall: drill a Ø3/16”(4.76mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.2 x 40mm Countersunk Screws (#23) OR ◾If no stud is present behind the wall: drill a Ø5/16”(8mm) hole and insert the Wall Anchors (#13) and use the ST4.2 x 40mm Countersunk Screws (#23).
©2020 DreamLine® All Rights Reserved. 12 d e e n v i r L e s m e a R e Dr ghts © Ri All ® NOTE 1 The Vertical (#09) U-Channel sits on top of the Bottom (#29) U-Channel. 2 Fig 12 right wall installation shown for single or inline panel 3 d e e n v i r L e s m e a R e Dr ghts © Ri All ® ! To prevent damage to the glass: Fully countersink the screws so the screw heads do not stick out from the surface of the u-channel.
©2020 DreamLine® All Rights Reserved. 13 1 d e e n v i r L e s m e a R e Dr ghts © Ri All ® 2 3 Fig 13 right wall panel installation shown d e e n v i r L e s m e a R e Dr ghts © Ri All NOTE ® After applying silicone into the Bottom U-Channel, install several 2”- 3” pieces of the PVC Glass Spacer 0.5mm (#28) into the Bottom U-Channel (#29) to protect the bottom edge of the glass. (Fig 11.
©2020 DreamLine® All Rights Reserved.
NOTE ©2020 DreamLine® All Rights Reserved. Reversible L-Bar™ Installation 15 *18” Reversible L-Bar™ (#30) is only used with door and inline panel glass models; The L-Bar™ is not used with the single panel installation. d e e n v i r L e s m e a R e Dr ghts © Ri All 30.5 30* 30.6 30.2 30.10 30.8 30.9 30.1 30.7 30.11 30.3 30.12 Fig 15a 30.4 Item ® 30.1 30.2 30.3 30.4 30.5 30.6 30.7 30.8 30.9 30.10 30.11 30.
©2020 DreamLine® All Rights Reserved. 16 d e e n v i r L e s m e a R e D2r ghts 3 © Ri All ® 1 *see NOTE insi de 4 side out 5 6 7 d e e n v i r L e s m e a R e Dr ghts © Ri All Fig 16 ® right-handed installation shown *see NOTE Tools Needed NOTE *The 0.5mm PVC Spacer for the L-Bar™ Glass Holder is shipped flat and must be molded around the top of the Panel Glass during installation.
©2020 DreamLine® All Rights Reserved. 17 d e e 3 n v i r L e s m e a R e Dr ghts © Ri All 1 ® 2 Max 3/16” (4mm) 4 Max 3/16” (4mm) inside d e e n v i r L e s m e a R e Dr ghts © Ri All Fig 17 ® right-handed L-Bar™ installation shown NOTE * To adjust the angle of the L-Bar™: Loosen the M5 x 14.5 screws, rotate the appropriate set screw (See Fig 18.3 and 18.4) to adjust the angle of the L-Bar™ (up to 3/16” (4mm)) in the desired direction. Hand tighten the M5 x 14.
©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved.
©2020 DreamLine® All Rights Reserved. Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
Problem/Symptom Suggested Solution •Check all shipping/packaging material for missing parts/components. Missing Parts •If not found, contact DreamLine Customer Support [1-866-731-2244] to order factory part replacement. •Inspect the 180º Degree Strike Vinyl (#19) and ensure the orientation of the vinyl is correct.
PLATINUM LINEA with MirrorMax™ Shower Panel Installation Manual Ver 2 022020 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® LINEA SURF {D3234721M11-08} ITEM # 09 11 13 23 29 34 19* 30* FACTORY PARTS INFORMATION FACTORY PART NUMBER ITEM DESCRIPTION QTY 07121132 U-Channel 1" SS for 10mm (3/8in) Glass (x71"/1805mm) 1 pc 010137131 Inline Panel Glass-Surf Pattern (34" nominal (863.6mm)) 1 pc 07552148 Wall Anchor, 5/16" (8mm) 8 pcs 090108 ST4.
PLATINUM LINEA with MirrorMax™ Shower Panel Installation Manual Ver 2 022020 Factory Parts Information d e e in erv L s m e a R e r s t D ® gh © eRi d l e l n v i r A L e s m e a R e LINEA MIRA {D3234721M12-08} FACTORY PARTS INFORMATION r s t D ITEM # FACTORY PART NUMBER ITEM DESCRIPTION h g © i 09 07121132 U-Channel 1" SS for 10mm (3/8in) Glass x(71"/1805mm) R l l 11 010137137 Inline Panel Glass-Mira Pattern (34" nominal (863.
©2020 DreamLine® All Rights Reserved.
d e e in erv L s m e a R e r s D ght © Ri All ® d e e in erv L s m e a R e r s D ght © Ri All ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com ©2020 DreamLine® All Rights Reserved.
