Installation Guide

Product Maintenance
BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls:
wipe them off after each use with a soft cloth. To clean the acrylic back walls use
non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray
cleaners. Never use abrasive cleansers, metal brushes or scrapers that could
scratch or dull the surface.
GLASS: To ensure long lasting life for your glass shower products: wipe them off
after each use with a soft cloth. Rinse and wipe off the glass using either a soft
cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch
the surface of the glass over time if left to dry). To prevent scratching the surface:
never use abrasive cleaners or cleaning products that contain scouring agents.
Never use bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use
with a soft cloth. Do not use abrasive cleaners or cleaning products containing
ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible
to prevent damage to the finish (peeling or corrosion). After cleaning the polished
finishes, rinse thoroughly and wipe dry with soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel
cleaner or polish to stainless steel hardware, work with (not across) the grain.
Never use an abrasive sponge or cloth, steel wool or wired brush as these may
permanently scratch the surfaces.
19UNIDOOR-X Style M Ver 1 Rev 5 03/2016