Installation Guide

15UNIDOOR-X Style M Ver 1 Rev 5 03/2016
Fig 10
Fig 11
2
3 4
1
9. Attach the Hinges (05) to the Stationary glass 2
(32) with the decorative bolts facing inside the shower.
Place a piece of 5/8” thick flat wood or a spacer of equal
thickness on the threshold or shower base next to the
Stationary glass 2. Place the Glass door (01) on the
wood or spacer to ensure that the door height is at 72”.
Level up the Glass door next to the Stationary glass
panel and fasten the hinges onto the Glass Door using
one gasket per side. Make sure the top edges of the
Glass door and Glass panel are aligned.
Remove the 5/8” thick flat wood or spacer from beneath
the Glass door. *
See Fig. 10 for details.
10. Mount the Handle (02) to the Glass door (#01).
See Fig. 11 for details.
* NOTE: It is recommended to leave the 5/8”
shims beneath the door glass until the silicone
has fully cured.