Installation Guide

“UNIDOOR (STYLE G)” Ver 1 Rev 5 06/2016

Style “G”: 6”-34” In-Line Half Wall Stationary Panel Installation

NOTE: The Unidoor shower door needs to be

installed prior to proceeding with the following

Stationary Glass installation instructions. Please

see the Single Shower Door installation manual

included in the door packaging for complete

shower door installation instructions. Before you

begin the installation, please recheck your shower

opening size. Specific size information can be

found on our website at DreamLine.com

NOTE: The Unidoor hinge is designed to over close 8°. The

following procedure is recommended to ensure proper

alignment of the panel glass and door.

1. Align the Door so that it is perpendicular to the wall and

parallel to the threshold. Measure across the bottom span of

the Door and threshold on the outside of shower and

determine an equal value.

Use a straight edge as guide to mark a line on the half wall

ledge on the handle side for future reference.

See Fig. 1 for details.

outside

Door

Value

outside

inside

Fig. 1