Installation Guide

UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019

NOTE: These adjustable hinges are factory set to overclose.

See Page 27 for instructions regarding the adjustment features

for these hinges.

NOTE: Do Not attach the handle to the door glass until instructed.

Do Not attempt to lift the door glass with the handle as this may result in damage to

the glass and/or serious personal injury. Use a professional grade glass suction cup

and an assistant when handling heavy glass.

hinge panel

Fig 19

hinge panel

glass

2mm hinge

gasket

TIP: Clean the hinge gaskets and

the glass around the hinge

notches with an ammonia-free

glass cleaner before installing the

hinges onto the glass.

Install the hinges flush

with the edge of the

Hinge Panel Glass

outside

19. Attach the Glass-to-Glass Hinges (#05) to the Hinge Panel

Glass (#32) with the bolts facing inside the shower. Install the

hinges onto the Hinge Panel Glass (#32) flush with the edge of

the glass.

Use at least one 2mm hinge gasket per side. Tighten the hinge

bolts evenly and snap in the decorative bolt caps. (Fig 19)