Installation Guide

“UNIDOOR PLUS (STYLE F)” Ver.1 Rev 4 06/2016
7
Style “F”: 6”-34” In-Line Stationary Panel Installation
NOTE: The Unidoor shower door needs to be
installed prior to proceeding with the following
Stationary Glass installation instructions. Please
see the Single Shower Door installation manual in
the door packaging (or the Style M Glass-to-Glass
hinge door installation manual included with the
hinge panel glass) for complete shower door
installation instructions. Before you begin the
installation, please recheck your shower opening
size. Specific size information can be found on our
website at DreamLine.com
NOTE: The Unidoor hinge is designed to over close 8°. The
following procedure is recommended to ensure proper
alignment of the panel glass and door.
1. Align the Door so that it is perpendicular to the wall and
parallel to the threshold. Measure across the bottom span of
the Door and threshold on the outside of shower and
determine an equal value.
Mark a line on the threshold base on the handle side
See Fig. 1 for details.
Value
inside
outside
outside
inside
Door
Fig. 1
2
1