Installation Guide

Tools Needed

INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 16

Fig 9

NOTE

◾For installation into an Acrylic Threshold:

drill an Ø1/8”(3mm) hole and use the

ST4.2 x 40mm Countersunk Screw (#23)

◾For installation into a Tile Threshold:

drill a Ø3/16”(4.76mm) hole up to the stud,

drill an Ø1/8” (3mm) pilot hole into the stud

and use the ST4.2 x 40mm Countersunk Screw (#23)

◾If a stud is present behind the wall:

drill a Ø3/16”(4.76mm) hole up to the stud,

rill an Ø1/8” (3mm) pilot hole into the stud

and use the

ST4.2 x 40mm Countersunk Screws (#23)

◾If no stud is present behind the wall:

drill a Ø5/16”(8mm) hole and insert the Wall Anchors (#13)

and use the ST4.2 x 40mm Countersunk Screws (#23).

NOTE

The surfaces need to be clean and free of debris before applying silicone.