Installation Guide

Installation steps for 6” hinge panel with Hinge Panel Glass Bracket
10
UNIDOOR-X (STYLE M) manual Ver 2 11/2016
Plumb line
Out-of-plumb
at the bottom
<Less than 90°
A
Plumb line
**If the wall is
out-of-plumb at the
bottom, measure that
dimension (A) and add
it to the length of the
U-channel ( 1/4” max):
Finished cut length=
Glass Width + 3/16” +
dimension A
vertical
U-channel
Hinge panel
Glass bracket
1-9/16”
69-7/16”
6”
bottom
U-channel**
Fig 4
Carpenter’s
Square
Model
height
of 72”
Fig 3
2.
Cut the vertical U-channel to
69-7/16”. Cut the bottom
U-channel** to 6”. (Fig 4)
1. Draw a line on the threshold and on
the wall to represent the centerline of the
U-channel. Make sure the line is parallel
to the front edge of the threshold. (Fig 3)
©2017 DreamLine. All Rights Reserved