Installation Guide

“UNIDOOR PLUS (STYLE F)” Ver.1 Rev 4 06/2016
11
6. Cut the U-channel 1 (76”, wall profile)
(09) at the top mark that was made in step
#4.
Place the U-Channel 1 (wall profile) on
the U-Channel 2 (44”, bottom profile)
(29) and align vertically with wall mark.
Mark the drill holes on the wall through the
predrilled holes in the U-Channel 1.
Now drill holes in the wall using Ø5/16
drill bit and insert the Ø5/16” Wall
anchors (13).
See Fig. 8 for details.
7. Apply waterproof silicone along the bottom
surface and around the holes of the U-
Channel 1 (76”, wall profile) (09).
Fasten the U-Channel 1 to the wall with
the Countersunk screw ST4.2x40 (23).
Apply Waterproof silicone into the groove
of both U-Channels.
NOTE: The surface needs to be clean and
free of debris before applying silicone
See Fig. 9 & 10 for details
Fig. 8
Ø5/16”
waterproof
silicone
Fig. 9
1
3
5
2
4
1
3
2
4
U-Channel 1
U-Channel 2