Installation Guide

10UNIDOOR-X Style M Ver 1 Rev 6 06/2016
Ø5/16"
waterproof
silicone
inside
wall
inside
wall
inside
wall
inside
wall
0 1/8”
1 2
3 4
5
Fig 3
Fig 4
2
3
4
5
6
1
4. Position the U-channel 2 (bottom profile) (#29)
onto the threshold along your line and mark the posi-
tion of the holes for drilling. You need to use at least 3
holes for the U-channel 2 (bottom profile) (#29): one
near each end and one near the center.
• Drill the holes into the threshold using an 1/8” Ø drill
bit.
• Apply a bead of silicone to the bottom of the
U-channel 2 (bottom profile) (#29) and attach it to
the threshold using the ST4.2 x 40mm screws (#23).
See Fig. 3 for details
5.
Next, position the U-channel 1 (#09) (wall
profile) along your vertical line and mark
the position of the holes for drilling. You
need to use at least four holes for the
U- channel 1 (#09) (wall profile).
• Drill the holes into the wall using a 5/16” Ø
drill bit.
• Insert the wall anchors (#13) into your 5/16”
holes.
• Apply silicone to the back of the U-channel 1
(#09) (wall profile) and attach it to the wall
using the ST4.2 x 40mm screws (#23).
See Fig. 4 for details