Installation Guide

9UNIDOOR-X Style M Ver 1 Rev 6 06/2016
U-Channel 1
Fig 2.2
Fig 2.1
U-Channel 2
L
L
3. Remove both U-channels from the Hinge Panel
Glass 2 (#32) and carefully set the glass aside.
Cut the U-channel 1 (76”, wall profile) (#09) at the
top mark that was shown in Fig. 2.1
Cut the U-channel 2 (44”, bottom profile) (#29) at
the mark that was shown in Fig. 2.2
NOTE: It may be necessary to remove any burrs from
the cut end of the U-channels with a metal file before
placing the U-channel onto the glass.
See Fig. 2 for details