Installation Guide

UNIDOOR PLUS (STYLE F) manual Ver.1 Rev 5 09/2016

Style “F”: 6”-34” In-Line Stationary Panel Installation

NOTE: The Unidoor shower door needs to be

installed prior to proceeding with the following

Stationary Glass installation instructions. Please

see the Single Shower Door installation manual in

the door packaging (or the Style M Glass-to-Glass

hinge door installation manual included with the

hinge panel glass) for complete shower door

installation instructions. Before you begin the

installation, please recheck your shower opening

size. Specific size information can be found on our

website at DreamLine.com

NOTE: The Unidoor hinge is factory set to over-close 8°.

The following procedure is recommended to ensure

proper alignment of the panel glass and door.

1. Align and hold the Door so that it is perpendicular to the wall

and parallel to the threshold. Measure across the bottom span

of the Door and threshold on the outside of the shower and

determine an equal value.

Mark a line on the threshold base on the handle side to assist

with aligning the inline panel glass.

See Fig. 1 for details.

Value

inside

outside

inside

Door

Fig. 1