Operation Manual

User’s Manual
GB
NL FR D
DECLARATION OF CONFORMITY
Hereby
,
------------ Manual/DreamLED Color Sensor Touch LED Lamp/08-14/V01 -------------
Copyright © DreamLED
®
The above mentioned product complies with the essential requirements, which
are specied in the directive 2004/108/EC on the approximation of the laws on the
Member States relating to electromagnetic compatibility.
This product has been tested against following standards and specications,
applying versions valid on August 2014:
EN55015:2006+A1:2007+A2:2009
EN61547:2009
EN61000-3-2:2006+A1:2009+A2:2009
EN61000-3-3:2008
Joseph Van Oosterum, CEO TE-Group NV
DreamLED Color Sensor Touch LED lamp
RGB Color Sensor Touch LED lamp
ILLUSTRATIONS
Illustration 1 Illustration 2
A
B
C
Illustration 3
Illustration 4
GB
Color Sensor Touch LED lamp
PACKAGE CONTENTS
The DreamLED Color Sensor Touch LED lamp packaging includes:
* Color Sensor Touch LED lamp
* Power cable + Power adapter
* Manual
FEATURES
• Type of LED: 3528 HP LED
• Desk lamp: 34x HP SMD LED
• Color touch lamp: 2x HP RGB LED
• Auto color changing mode
• Max. waage: 5W
• Color temperature: 3700~4000K
• Lifeme: >25000 hours
• Lumen: max. 200 Lm
• Color rendering index: >80RA
• Power supply: DC 5V/1A
• Instant start
• Operang temperature: -10 ~ 40 °C
• Material: ABS + PS +Rubber
• Dimensions: 480 mm (H)
• Color: Opal white
• Weight: 775 grams
INSTALLATION
See illustraon 1
• Connect the power adapter to the power input at the back of the lamp.
• Plug the power adapter into an outlet with an input voltage of 110V-240V AC.
OPERATION
See illustraon 2
A. ON/OFF touch key + 3-level brightness sensor touch dimmer (for desk lamp)
B. Sensor touch wheel for changing color of the living color lamp
C. ON/OFF sensor touch key (for living color lamp)
Operaon desk lamp
See illustraon 3
Press the touch key (A):
• 1x to turn the lamp ON. First level of brightness is shown.
• 2x to acvate the 2
nd
brightness level.
• 3x to acvate the 3
rd
brightness level.
• 4x to turn the lamp OFF.
Operaon living color lamp
See illustraon 3
• Press the sensor touch key (C) to turn the lamp ON/OFF.
• Select a color using the sensor touch wheel (B).
• Press the sensor touch key (C) for 3 seconds to show all colors one by one
automacally.
Flexible lamp arm
See illustraon 4
The exible goose neck lamp arm can be rotated in dierent angles.
Note:
• When adjusng the posion of the arm, always hold the lamp base.
• Excessive adjustment may cause damage.
SAFETY INSTRUCTIONS
• Never open the Color Sensor Touch LED Lamp.
• Never touch the plug contacts with sharp or metal objects.
• Make sure that cables cannot cause a trip hazard.
• Use only the original power supply and original accessories.
• Never place the device in the vicinity of heat sources.
• Never place the unit on surfaces that are heat sensive.
• Protect the device from special liquids and vapors.
• Unplug the unit at the main power socket before cleaning. Do not use any solvent
based cleaning agents, only a so, dry an-stac cloth.
• Do not aempt repairs yourself.
• If the unit is not properly installed or operated DreamLED® cannot accept liability.
SUPPORT
For more informaon, technical quesons and return requests concerning this product,
you should contact: [e-mail].
GUARANTEE
Copyright © DreamLED
®
. DreamLED
®
is a registered trademark of TE-Group NV. The
DreamLED
®
brand stands for superior product quality and outstanding customer
service. That is why DreamLED
®
warrants this product against all defects in material
and workmanship for a period of two (2) years from the date of original purchase of the
product. The terms of this guarantee and the extent of responsibility of DreamLED
®
under
this warranty can be downloaded from the website: www.dream-led.eu.