User Guide

4
III. ASSEMBLING AND DISSEMBLING THE RIG
DREAMGRIP™ Evolution PRO set comes assembled in the box.
DREAMGRIP™ Evolution MOJO comes dissembled in the box, but can be assembled easily in
about a minute. We recommend the sequence as below:
1) Connect a Grip with two Tracks and tighten them with two ¼” Bolts.
2) Slide the Optics Adaptor between the tracks from the open side and tighten it with two more
Bolts from the top and the bottom through Track cavity.
Pic.3. Sliding the Optics Adaptor between Tracks.
3) Attach the second Grip and tight it up with two Bolts.
4) Finally attach Clamp Holder and fix it with the Bolt.
Pic.4. Attaching the Clamp holder and the second Grip.
NOTE: To dissemble the Rig take the same actions in an inverse sequence.
(!)TIP: Use the Double Stud bolt together with standard ¼” Bolts to connect elements together to
construct alternative rigs. As an example, refer to the picture at the back side of the retail box. You
can see one Grip with Microphone directly connected to the Clamp Holder for one hand held
shooting. For more Transforming options you may check the website www.deramgrip.com